Drone LiDAR
Apus
Compact, lightweight drone LiDAR with GNSS/INS and an industrial camera, for shorter-range mapping jobs.
- Weight
- About 1 kg
- Positioning
- GNSS-aided INS
- Camera
- Industrial-grade RGB
- Software
- SatLiDAR
Drone LiDAR
Compare side by side with similar models
Apus-MX
Long-range drone LiDAR with a 45 MP full-frame camera, 5 cm system accuracy at 300 m, for DJI Matrice drones.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| System accuracy | 5 cm H / 5 cm V at 300 m |
|---|---|
| Range | 1200 m at 60% reflectivity |
| Camera | 45 MP full frame |
| Weight | 1.55 kg |
Overview
Apus-MX is a drone payload for mapping terrain, corridors and towns from height. The scanner reaches 1200 m at 60% reflectivity and records up to 8 returns per pulse, which helps the laser reach the ground through trees. The 45 MP full-frame camera captures imagery for orthophotos and point cloud colouring in the same flight. It fits DJI Matrice 300, 350 and 400 drones through Skyport.
Key features
- System accuracy 5 cm H and V at 300 m
- Range up to 1200 m at 60% reflectivity
- Up to 8 returns for vegetation penetration
- 45 MP full-frame mapping camera
- 500 Hz IMU, heading 0.019°
- Fits DJI Matrice 300 / 350 / 400
Technical specifications
Source: SatLab Geosolutions published specifications. Figures can change between product versions; we confirm them in every quotation.
LiDAR
| System accuracy | H 5 cm at 300 m, V 5 cm at 300 m |
|---|---|
| Range accuracy | 1.5 cm / 0.5 cm at 150 m |
| Measuring range | 1200 m at 60% reflectivity |
| Field of view | 80° |
| Returns | Up to 8 |
Positioning
| GNSS | GPS L1/L2/L5, GLONASS L1/L2, BeiDou B1/B2/B3, Galileo E1/E5a/E5b |
|---|---|
| IMU rate | 500 Hz |
| Position accuracy (post-processed) | 0.01 m H, 0.02 m V RMS |
| Attitude accuracy (post-processed) | Heading 0.019°, roll and pitch 0.006° |
Camera
| Resolution | 45 MP |
|---|---|
| Sensor | 36 × 24 mm (8192 × 5468) |
| Focal length | 18 mm |
| Field of view | 90.0° × 67.4° |
| Minimum interval | 1 s |
Physical
| Weight | 1.55 kg |
|---|---|
| Protection | IP64 |
| Operating temperature | −20 to +50 °C |
| Mount | DJI Skyport |
| Compatible drones | DJI Matrice 300 / 350 / 400 |
| Data transfer | USB-C, up to 160 MB/s |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Similar products
Drone LiDAR
Planning a survey, a tender or a new project?
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.