LiDAR sensor
Livox Mid-360S
Updated Mid-360 with the same 360° × 59° view, 0.1 m blind zone and 200,000 pts/s, plus a 100 m cut-off range.
- Range
- 40 m at 10% reflectivity
- Field of view
- 360° × 59°
- Point rate
- 200,000 pts/s
- Weight
- 265 g
3D safety LiDAR
RoboSense Safety Airy
3D safety LiDAR designed to PL d, SIL 2 and Type 3, giving 3D protective fields plus a point cloud for navigation.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| Safety rating | PL d, SIL 2, Type 3 |
|---|---|
| Field of view | Near-hemispherical 3D |
| Outputs | Safety fields + point cloud |
| Channels | Dual-channel safety |
Overview
Safety Airy is a 3D safety LiDAR designed to PL d (ISO 13849), SIL 2 (IEC 61508) and Type 3 (IEC 61496). Its near-hemispherical 3D protective and warning fields can detect overhanging shelves, thin rods and hands that a 2D safety scanner misses, and it outputs a high-beam point cloud at the same time, so one unit can replace a separate safety scanner and navigation LiDAR. RoboSense lists it for pre-order; ask us about availability. Figures are RoboSense's published typical values; ask us for the current datasheet.
Key features
- Designed to PL d (ISO 13849), SIL 2 (IEC 61508), Type 3 (IEC 61496)
- Near-hemispherical 3D protective and warning fields
- Detects overhanging loads, thin rods and hands
- Point cloud output for navigation and obstacle avoidance
- Two independent safety channels with self-diagnostics
- Contamination detection
Technical specifications
Source: RoboSense published specifications. Figures can change between product versions; we confirm them in every quotation.
Safety
| Standards | Designed to PL d (ISO 13849), SIL 2 (IEC 61508), Type 3 (IEC 61496) |
|---|---|
| Architecture | Two independent dual-processor safety channels with self-diagnostics |
| Protection | 3D protective and warning fields, multiple selectable distance resolutions |
| Robustness | Resistant to crosstalk and ambient light; detects window contamination |
Perception
| Field of view | Near-hemispherical 3D |
|---|---|
| Point cloud | High-beam-count 3D point cloud output alongside safety functions |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Similar products
LiDAR sensor
LiDAR sensor
Livox Mid-360L
Lower-cost 360° LiDAR, 245 g and 4.2 W, with 45 m range at 10% reflectivity and 100,000 pts/s for robots and AGVs.
- Range
- 45 m at 10% reflectivity
- Field of view
- 360° × 44°
- Point rate
- 100,000 pts/s
- Power
- 4.2 W
LiDAR sensor
Livox Mid-70
70.4° circular-view LiDAR with 90 m range at 10% reflectivity and a small blind zone, for mapping rigs and robots.
- Range
- 90 m at 10% reflectivity
- Field of view
- 70.4° circular
- Point rate
- 100,000 pts/s
- Weight
- 580 g
Planning a survey, a tender or a new project?
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.