LiDAR sensor
Livox Mid-360S
Updated Mid-360 with the same 360° × 59° view, 0.1 m blind zone and 200,000 pts/s, plus a 100 m cut-off range.
- Range
- 40 m at 10% reflectivity
- Field of view
- 360° × 59°
- Point rate
- 200,000 pts/s
- Weight
- 265 g

Lower-cost 360° LiDAR, 245 g and 4.2 W, with 45 m range at 10% reflectivity and 100,000 pts/s for robots and AGVs.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| Range | 45 m at 10% reflectivity |
|---|---|
| Field of view | 360° × 44° |
| Point rate | 100,000 pts/s |
| Power | 4.2 W |
The Mid-360L is the cost-focused member of the Mid-360 family. It sees 360° around and −10° to 34° vertically, reaches 45 m on a 10% target and draws only 4.2 W, with a built-in IMU, Ethernet output and PTP or GPS time sync. It is aimed at service, delivery and warehouse robots built in volume.
Source: Livox published specifications. Figures can change between product versions; we confirm them in every quotation.
| Laser | 905 nm, Class 1 (IEC 60825-1:2014) |
|---|---|
| Range | 45 m at 10% reflectivity (typical, 100 klx); 100 m cut-off range |
| Blind zone | 0.1 m |
| Field of view | H 360°, V −10° to 34° (typical) |
| Range precision (1σ) | ≤ 3 cm at 10 m; ≤ 5 cm at 0.2 m |
| Point rate | 100,000 pts/s (first return) |
| Frame rate | 10 Hz typical |
| IMU | Built-in ICM40609 |
|---|---|
| Data | 100BASE-TX Ethernet |
| Time sync | IEEE 1588-2008 (PTPv2), GPS (UTC + PPS) |
| Power | 4.2 W |
| Supply voltage | 12 to 27 V DC |
| Size | 65 × 65 × 63 mm |
|---|---|
| Weight | 245 g |
| Protection | IP67 |
| Operating temperature | −20 to +65 °C |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.