LiDAR sensor
Livox Mid-360S
Updated Mid-360 with the same 360° × 59° view, 0.1 m blind zone and 200,000 pts/s, plus a 100 m cut-off range.
- Range
- 40 m at 10% reflectivity
- Field of view
- 360° × 59°
- Point rate
- 200,000 pts/s
- Weight
- 265 g
Solid-state LiDAR
RoboSense E2
Second-generation solid-state LiDAR: up to 180° × 135° view, 1 cm precision, 1.5 million pts/s and ≤ 5 W typical.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| Field of view | Up to 180° × 135° |
|---|---|
| Range | 35 m at 10% reflectivity |
| Point rate | 1,500,000 pts/s (dual) |
| Precision | 1 cm (1σ) |
Overview
E2 is RoboSense's second-generation solid-state LiDAR. It covers up to 180° × 135°, reaches 35 m on a 10% target, gives up to 1 cm precision and outputs up to 1.5 million points per second in dual return. It has built-in cameras, consumes ≤ 5 W typically and is rated from −40 to +85 °C, so it fits robot heads, wrists and compact devices. Figures are RoboSense's published typical values; ask us for the current datasheet.
Key features
- Fully solid-state, no moving parts
- Up to 180° × 135° field of view
- 35 m at 10% reflectivity
- Up to 1,500,000 pts/s (dual return)
- Up to 1 cm (1σ) precision
- ≤ 5 W typical, −40 to +85 °C
Technical specifications
Source: RoboSense published specifications. Figures can change between product versions; we confirm them in every quotation.
Performance
| Scanning | Fully solid-state (2D VCSEL + SPAD-SoC) |
|---|---|
| Field of view | Up to 180° × 135° |
| Range | 35 m at 10% reflectivity |
| Point rate | Up to 1,500,000 pts/s (dual return) |
| Precision (1σ) | Up to 1 cm |
| Angular resolution | Up to 0.375° × 0.375° |
Physical and power
| Cameras | Built-in dual camera |
|---|---|
| Power | ≤ 5 W typical |
| Operating temperature | −40 to +85 °C |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Similar products
LiDAR sensor
LiDAR sensor
Livox Mid-360L
Lower-cost 360° LiDAR, 245 g and 4.2 W, with 45 m range at 10% reflectivity and 100,000 pts/s for robots and AGVs.
- Range
- 45 m at 10% reflectivity
- Field of view
- 360° × 44°
- Point rate
- 100,000 pts/s
- Power
- 4.2 W
LiDAR sensor
Livox Mid-70
70.4° circular-view LiDAR with 90 m range at 10% reflectivity and a small blind zone, for mapping rigs and robots.
- Range
- 90 m at 10% reflectivity
- Field of view
- 70.4° circular
- Point rate
- 100,000 pts/s
- Weight
- 580 g
Planning a survey, a tender or a new project?
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.