LiDAR sensor
Livox Mid-360S
Updated Mid-360 with the same 360° × 59° view, 0.1 m blind zone and 200,000 pts/s, plus a 100 m cut-off range.
- Range
- 40 m at 10% reflectivity
- Field of view
- 360° × 59°
- Point rate
- 200,000 pts/s
- Weight
- 265 g
Solid-state LiDAR
RoboSense E1R
Fully solid-state LiDAR for robots: 120° × 90° view, 30 m at 10% reflectivity (75 m maximum), 260,000 pts/s.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| Field of view | 120° × 90° |
|---|---|
| Range | 30 m at 10% (75 m max) |
| Point rate | 260,000 pts/s |
| Scanning | Solid-state |
Overview
E1R has no moving parts: a 2D VCSEL emitter and SPAD-SoC receiver scan electronically. It covers 120° × 90° with 144 beams, reaches 30 m on a 10% target and 75 m at most, and has a small flat 7 × 35 × 75 mm window with a 1/4-inch threaded mount. It is used for obstacle avoidance, mapping and navigation on robots. Figures are RoboSense's published typical values; ask us for the current datasheet.
Key features
- Fully solid-state, no moving parts
- 120° × 90° field of view
- 30 m at 10% reflectivity, 75 m maximum
- 260,000 pts/s, 144 beams
- Flat 7 × 35 × 75 mm window
- 1/4-inch threaded mount
Technical specifications
Source: RoboSense published specifications. Figures can change between product versions; we confirm them in every quotation.
Performance
| Scanning | Fully solid-state (2D VCSEL + SPAD-SoC) |
|---|---|
| Field of view | 120° × 90° |
| Range | 30 m at 10% reflectivity; 75 m maximum |
| Point rate | 260,000 pts/s |
| Beams | 144 |
Physical
| Window | 7 × 35 × 75 mm, flat |
|---|---|
| Mounting | 1/4-inch threaded mount |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Similar products
LiDAR sensor
LiDAR sensor
Livox Mid-360L
Lower-cost 360° LiDAR, 245 g and 4.2 W, with 45 m range at 10% reflectivity and 100,000 pts/s for robots and AGVs.
- Range
- 45 m at 10% reflectivity
- Field of view
- 360° × 44°
- Point rate
- 100,000 pts/s
- Power
- 4.2 W
LiDAR sensor
Livox Mid-70
70.4° circular-view LiDAR with 90 m range at 10% reflectivity and a small blind zone, for mapping rigs and robots.
- Range
- 90 m at 10% reflectivity
- Field of view
- 70.4° circular
- Point rate
- 100,000 pts/s
- Weight
- 580 g
Planning a survey, a tender or a new project?
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.