LiDAR sensor
Livox Mid-70
70.4° circular-view LiDAR with 90 m range at 10% reflectivity and a small blind zone, for mapping rigs and robots.
- Range
- 90 m at 10% reflectivity
- Field of view
- 70.4° circular
- Point rate
- 100,000 pts/s
- Weight
- 580 g
LiDAR sensor
Compare side by side with similar models
Livox Avia
Lightweight 498 g LiDAR with 190 m range at 10% reflectivity and triple returns, widely used for drone mapping.
Supplied in India by Ecoleap Solutions with installation, training and after-sales support. Specifications below are from the manufacturer's published data.
| Range | 190 m at 10% reflectivity |
|---|---|
| Field of view | 70.4° × 77.2° |
| Point rate | 240,000 pts/s |
| Weight | 498 g |
Overview
Avia combines a 70.4° × 77.2° non-repetitive scan with a repetitive line-scan mode, 190 m range on a 10% target and up to three returns per pulse, which helps under vegetation. At 498 g with a built-in IMU it is a common choice for drone LiDAR mapping and for vehicle-mounted mapping systems.
Key features
- 70.4° × 77.2° non-repetitive scan, or 70.4° × 4.5° line scan
- 190 m at 10% reflectivity
- Up to 720,000 pts/s (triple return)
- 2 cm precision at 20 m
- Built-in IMU
- IP67, 498 g
Technical specifications
Source: Livox published specifications. Figures can change between product versions; we confirm them in every quotation.
Performance
| Laser | 905 nm, Class 1 (IEC 60825-1:2014) |
|---|---|
| Range (100 klx) | 190 m at 10%, 230 m at 20%, 320 m at 80% reflectivity |
| Range (0 klx) | 190 m at 10%, 260 m at 20%, 450 m at 80% reflectivity |
| Field of view | Non-repetitive scan 70.4° (H) × 77.2° (V); repetitive line scan 70.4° (H) × 4.5° (V) |
| Range precision (1σ) | 2 cm at 20 m |
| Beam divergence | 0.28° (V) × 0.03° (H) |
| Point rate | 240,000 pts/s (first or strongest); 480,000 (dual); 720,000 (triple return) |
| Data latency | ≤ 2 ms |
Interface and power
| IMU | Built-in BMI088 |
|---|---|
| Data | 100 Mbps Ethernet |
| Time sync | IEEE 1588-2008 (PTPv2), PPS, GPS (PPS + UTC) |
| Power | 9 W repetitive scan, 8 W non-repetitive (16 W at start-up) |
| Supply voltage | 10 to 15 V DC (9 to 30 V DC with Livox Converter 2.0) |
Physical
| Size | 91 × 61.2 × 64.8 mm |
|---|---|
| Weight | 498 g without cables |
| Protection | IP67 |
| Operating temperature | −20 to +65 °C |
Source: manufacturer's published datasheet. Values are measured under the manufacturer's test conditions and may change without notice.
Similar products
LiDAR sensor
Long-range LiDAR sensor
Livox Avia 2
1535 nm long-range LiDAR: 80° × 80° view out to 400 m, or a 15° focus mode reaching 800 m at 10% reflectivity.
- Range
- 400 m at 5% (normal mode)
- Field of view
- 80° × 80° (focus 15° × 15°)
- Point rate
- 350,000 pts/s
- Laser
- 1535 nm
Long-range LiDAR sensor
Livox Tele-15
Narrow 14.5° × 16.2° telephoto LiDAR reaching 320 m at 10% and 500 m at 50% reflectivity, rated −40 to +85 °C.
- Range
- 320 m at 10% reflectivity
- Field of view
- 14.5° × 16.2°
- Point rate
- 240,000 pts/s
- Weight
- 1.5 to 1.6 kg
Planning a survey, a tender or a new project?
Send us your scope and we will reply with a suitable configuration and a budgetary quote, usually within one working day.